Maintenance and repair of stainless steel china slurry pumps methods

Maintenance and repair of stainless steel china slurry pumps methods:
 
( 1 ) Check the china slurry pump and piping and stainless steel junction without loosening . Rotate the stainless steel china slurry pumps, stainless steel china slurry pumps Look is flexible .

( 2 ) adding to the bearing body bearing lubrication oil, observe the oil level should be the subject of the centerline of the oil , the oil should be replaced or supplemented .

( 3 ) Remove the stainless steel china slurry pumps china slurry pump the water plug , filling water ( or cited pulp ) .

( 4 ) Close the outlet valve and outlet pressure gauge road and imported vacuum table .

( 5 ) to move the motor , and proved the motor rotation is correct .

( 6 ) start the motor , when the stainless steel china slurry pump functioning , open the export and import of vacuum gauges , depending on the show proper pressure , and gradually open the valve, and check the motor load conditions .

( 7 ) try to control the china slurry pump flow and the stainless steel head on the plate specified range to ensure that the stainless steel china slurry pumps operate at maximum efficiency , in order to obtain the maximum energy savings. china slurry pump inlet valve

( 8 ) during operation, the stainless steel china slurry pump , bearing temperature can not exceed the ambient temperature of 35C °, the maximum temperature should not exceed 80C °.

( 9 ) If found to have abnormal sound stainless steel china slurry pumps should be immediately stopped to check why.

(10 ) To stop the use of stainless steel china slurry pumps , turn off the valve, pressure gauge, then stop the motor.

( 11 ) stainless steel china slurry pumps in the first month of work , replacement of oil by 100 hours , after every 500 hours , oil change once.

( 12 ) frequently adjusting packing gland, packing indoor drip normal ( to drip out into appropriate ) .

( 13 ) periodically check the wear sleeve , wear large rear should be replaced.

( 14 ) stainless steel china slurry pumps in the winter season, parking , the need to unscrew the lower china slurry pump drain plug will put the net media. Prevent cracking.

( 15 ) stainless steel china slurry pumps for long periods, need to china slurry pump all apart , dry water , the combination of the rotating parts and coated with grease installed, for safekeeping.