Submerged slurry pump manufacturer is a slurry pump manufacturer

Submerged slurry pump manufacturer is a slurry pump manufacturer , and is widely used in various industries .

Brings you down on the maintenance of liquid slurry pump manufacturer ‘s maintenance work considerations related content, this knowledge are interested please Check it out .

1, The dynamic change process, such as found noise or unusual sounds , immediately stop checks ;

2 , When the pump is working six hours , you should check the mechanical seal , repair or replacement shall be in accordance with the degree of wear , otherwise it will cause damage to the shaft and the bearing.

3 , Regular inspection flexible coupling, pay attention to the motor bearing temperature rise ;

4, Note that the pump bearing temperature should not exceed the maximum ambient temperature of 35 degrees but not greater than 75 degrees ;

5 , The oil cup should be filled with calcium-based grease , to ensure the normal lubrication of bearings ;

6 , The pump in the first month of work , or after 100 hours of operation ,slurry pump manufacturer replace the motor bearing oil cup butter , and later changed every 2000 hours of work ;

7 , The pump should be 2000 hours per cycle check the clearance between the impeller and the pump ( or pump head) is not too large friction losses , the maximum gap not more than 1.5 mm , such as over the front wheel or the cover can be replaced .