UHB-ZK Corrosion-resistant mortar pump product structure features

UHB-ZK series of corrosion-resistant mortar pump is a cantilever single-stage single-suction centrifugal pump, made of steel-lined UHMWPE with excellent corrosion resistance and excellent wear resistance. Now BODA to introduce UHB-ZK corrosion-resistant wear-resistant mortar pump product structure features what. UHB-ZK Corrosion-resistant wear-resistant mortar pump UHB-ZK Corrosion-resistant wear-resistant mortar pump Scope of application 

1. The structure is designed to open the front cantilever, the impeller is semi-open (without front cover), enhanced flow through the passage So that the medium particles and impurities quickly through the pump chamber without clogging, shaft seals for the K-type fluorine rubber seal ring with cooling water jacket, taking into account the dual requirements of corrosion and wear. Corrosion-resistant wear, a pump multi-purpose, acid-base liquid slurry are applicable. 

2. The pump body is made of steel-lined UHMW-PE with a thickness of 8-20mm. The impeller is divided into two types, which can be closed or closed. It can be selected according to the medium condition. Sealing: K-type dynamic seal. 

3. Strong abrasion resistance: The overcurrent components are all made of steel-lined UHMW-PE. The wear resistance of UHMW-PE is the highest among the plastic materials. Compared with nylon 66 PA66), PTFE high 4 times, is carbon steel, stainless steel wear resistance of 7-10 times. 

4. Strong impact resistance: the impact strength of ultra-high molecular weight polyethylene in general engineering plastic first, is (acrylonitrile / butadiene / styrene) copolymer (ABS) 5 times, and can be below minus 196 ℃ stable, which is not the characteristics of any other plastic. 

5. Excellent corrosion resistance: The pump can withstand a variety of corrosive media (acids, alkalis, salts) and organic solvents in a certain temperature and concentration range, immersed in 80 organic solvents at 20 ℃ and 90 ℃ for 30d. Appearance without any abnormalities, other physical properties almost no change. 

6. No noise: UHMW polyethylene impact energy absorption for the highest value in the plastic, good sound-deadening, which in the transport process to minimize the noise generated by liquid flow. 

7. Safe and reliable, toxin-free: The UHMW-PE used in this pump is extremely stable and therefore suitable for use in the food industry. 

8. Friction coefficient is low: The internal friction system of the pump is only 0.07-0.11, so it has self-lubricating property. Under water-lubricated conditions, it has a lower coefficient of kinetic friction than PA66 and POM. When working in a sliding or turning form, lubricity is better than when steel and brass are lubricated. 

9. Good anti-sticking: Ultra-high molecular weight polyethylene (UHMW-PE) excellent anti-sticking, anti-adhesion capacity and PTFE equivalent, it is conveying some high viscosity medium also outstanding.