XS Split Case Pump
Pump Description:
XS type pump is a new generation of high performance single-stage double-suction centrifugal split pumps. They are mainly used in delivering liquids of the water plant, airconditioner circulation water, heating pipe network system, building water supply, irrigation and drainage of pump stations, power plants, industrial water supply system, fire protection, ships industry and mine. It is a new substitute of SH, S, SA, SLA and SAP.
Main performance parameters● Pump outlet diameter Dn: 80~900mm● Capacity Q: 22~16236m3/h● Head H: 7~300m
● Temperature T: -20℃~200℃ ● Solid parameter ≤80mg/L ● Permissible pressure ≤5Mpa
|
Description of Pump Type● For example:XS 250-450A-L(R)-J● XS: advanced type split centrifugal pump● 250:pump outlet diameter
● 450:standard impeller diameter ● A: Changed outer diameter of impeller (the max diameter without mark) ● L: vertical mount ● R: heating water ● J: Pump speed changed(Maintain the speed without mark) |
Pump Supporting program
Item |
Pump Supporting program A |
Pump Supporting program Q |
Pump Supporting program B |
Pump Supporting program S |
|||
1 |
2 |
1 |
2 |
3 |
|||
Pump casing |
Grey cast iron |
Ductile cast iron |
Ductile cast iron |
Extra low carbon stainless steel |
Ni-Cr chromiumcast iron |
Ductile cast iron |
Stainless steel |
Impeller |
Grey casting iron |
Cast steel |
Stainless steel |
Duplex S.S. |
Tin bronze |
Tin bronze |
Tin bronze |
Shaft |
#45 steel |
#45 steel |
Stainless steel |
Duplex S.S. |
2Crl3 |
2Crl3 |
2Crl3 |
Shaft sleeve |
#45 steel |
#45 steel |
Stainless steel |
Extra low carbon stainless steel |
lCrl8Ni9Ti |
lCrl8Ni9Ti |
lCrl8Ni9Ti |
Wear ring |
Grey casting iron |
Cast steel |
Cast steel |
Duplex S.S. |
Tin bronze |
Tin bronze |
Tin bronze |
Services |
For pure water and lower strength applications |
For pure water high strength applications |
For media with more solid impurities PH<6 chemical corrosion and for high strength applications |
The sea water pump |
|||
These configurations are recommended by the manufacturer, customers could change their materials according to specific needs. |
Construction drawing I
Construction drawing II
XS-L vertical structure
Structure Feature
⒈ Type XS pumps work stably with less noise and vibration, may be properly work at raising speed due to short spacing between both side supports, thus they can be widely used.
⒉ The pipelines arrangement of type XS pump looks simple and beautiful due to inlet and outlet at the same line.
⒊ The same rotor of type XS pumps can be operated in reverse direction to avoid damage to the pumps by water hammer.
⒋ Unique design of high temperature form: using middle support, thickening the pump casing, using cooling seals and oil lubrication bearing, make XS pump suitable for working at 200℃ , especially for suppling heating net system.
5. Type XS pump can be vertically or horizontally mounted according to different working condition, with mechanical seals or packing seals.
6. With industrial design, the outline of XS is clear and beautiful in line with modern aesthetics.
7. The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus reduce the operating costs significantly.
8. The NPSHr of type XS pumps are 1-3 meters lower than the same type split pumps which reduced the foundation costs and extend the using life.
9. Choosing import brand bearing, and other parts material chosen by customer, make the pump suitable for any operation condition and reduce the maintenance cost significantly.
10. It is not necessary to adjust mechanical seals, so it is very easy and simple to replace them.
11. It is rapid and simple to assemble and dismount the rotor parts due to using elastic prestress assembling.
12. It is unnecessary to make adjustment to any clearance when assembling.
Pump Technical Data