Slurry creeping phenomenon how do occur
Slurry is mixed with air in the hydraulic system caused by failure of the hydraulic system creeping root causes . When the air mixed with oil , the pressure oil is dissolved in a portion of the remaining free -shaped bubble is formed at a pressure of oil floating in the air due to the great compressibility of the actuator load fluctuation causes oil pressure pulsation causes gas expansion or contraction of the actuator causes significant changes in fuel supply , so that the “rigid” link into a ” flexible” link, leading to crawl produce . To prevent air intrusion hydraulic system, the pipe joints should be tightened nut to prevent leakage.
As much as possible out of the tubing as far ensure that the inlet , return line noninterference , and separated out the tubing separators . Clear attached to the oil filter online dirt, slurry pump manufacturer or replace the filter of sufficient capacity to ensure the smooth suction . Add a little oil and check back often to keep the oil is not lower than the oil standard indicator line to prevent the intake air system . Using low viscosity fluids to reduce flow resistance and ensure smooth and absorbing sufficient to avoid cavitation in the gas leaving the oil leaking .
Post time: Jul-13-2021