Slurry pipeline installation considerations

Slurry pipeline installation considerations  

Slurry pipeline installation is part of the installation , the installation What precautions do, if you want to know the answer, it may wish to follow along with the following Xiaobian look at it, you might find helpful:

1 , Slurry pump inlet when negative pressure suction line valve should not be installed .

2 , Should be transported long distances to take a larger diameter . Slurry pipeline should have its own stand, plus the weight of the pipe does not allow the pump to avoid the crush of the pump .

3 , Slurry pump mounting height , length and diameter of the pipe , slurry pump manufacturer the flow rate should be specified.

Slurry works   The main components of the centrifugal slurry pump impeller and casing, impeller shaft located inside the housing unit , and with the prime mover connected to form a whole. When the prime mover drives the impeller rotates , the impeller blades rotate forcing the fluid , i.e., acting on the blade along its direction of movement of the fluid , thereby forcing the fluid pressure increase in potential energy and kinetic energy .

At the same time , the fluid in the inertial force , the flow from the center to the edge of the impeller , and outflow at high speed impeller , press out into the room , and then discharged through the diffusion tube , a process called pressurized water process. Also, due to the centrifugal slurry pump impeller center fluid flow edge , forming a low pressure area in the center of the impeller , when it has sufficient vacuum , the pressure in the suction side of fluid into the impeller through the suction chamber , a process known as suction process .

Because of the continuous rotation of the impeller , the fluid will continuously discharge , suction form a continuous work. Centrifugal slurry pump working process , in fact, is an energy transfer and conversion process. It mechanical energy of the motor rotating at high speed , and passing through a vane pump up fluid is pumped into the pressure energy and kinetic energy .