Slurry pump manufacturer maintenance

Slurry pump manufacturer maintenance

1 . The Daily indecent bay oil level is appropriate , correct oil level is near the oil level line position , shall not exceed ± 2mm.

2 . Keep equipment clean , dry and free of oil, does not leak.

3 . Often behave pump operation is abnormal sound , vibration and leakage , identify problems and timely treatment.

4 . Pumps running in non- evacuation status , because the pump is running in the state not only taking the time to severe vibration , but also affect pump life , we must pay special attention.

5 . Non- metallic objects into the pump and the pump allows bulk solid passing over , and allowed to enter the rubber , cotton, silk, plastic sheeting and the like flexible material , so as not to undermine the flow components and clogging impeller channel , so that the pump does not work.

6 . Always check the seal water and cooling water pressure and flow is appropriate, slurry pump manufacturer can be used to check the seal pipe or valve opening degree detecting the temperature of the stuffing box method , the temperature is high Description insufficient water supply . For lubricated with grease filler pump , every day should be regularly refuel once or twice to ensure that the packing is in good lubrication .

7 . Periodic testing seal water leakage , when the leakage increased, should be adjusted packing gland bolts , you need to be timely exchange filler.

8 . Is recommended when using PTFE carbon fiber soaked cotton fillers or butter to cook , work pressure is less than 0.5MP a, asbestos packing can be used .